Lifetime Workmanship Warranty
Proudly Serving Millington, TN

Fencing in Millington, TN —
Backed by a Lifetime
Workmanship Warranty

From the older neighborhoods near Naval Support Activity Mid-South to the newer lots on Millington's north side, North Slope Exteriors builds fences that hold their line through the soil movement between Big Creek and the Loosahatchie. Every project starts with a free, no-obligation on-site quote — call (870) 218-4440 or schedule yours below.

650+

Mid-South Projects

10+

Years Experience

Lifetime

Workmanship Warranty

5.0 Average Rating

Why Millington Homeowners Call Us

Fencing Built for Millington's Permit Rules, Lot Geometry, and Drainage

A Millington fence has to clear three things before it is ever worth building: a city permit with a site drawing, a set of height and placement rules that change on a corner lot, and drainage ground that sits between Big Creek and the Loosahatchie. We work through all three before we dig. We confirm the current requirement with Millington Planning and Development before we build.

City Fence Permit & Front-Yard Materials

Millington Municipal Code Title 13, Chapter 8 requires a city fence permit before installation, and the application includes a drawing showing the fence relative to the property line. Front-yard materials are limited to split rail, brick, wood or PVC picket, and wrought iron with brick or stone columns — anything else needs Planning Commission approval, and chain link is allowed in side and rear yards only where it is not visible from the street. We confirm the current requirement with Millington Planning and Development before we build.

Corner Lots, Height Caps & Gate Placement

Front yards are capped at 48 inches and side and rear yards run up to 8 feet. A fence over 48 inches on a corner lot must sit 15 feet back from the street right-of-way and go in the yard other than the principal entrance, and a gate into a fenced front yard must be at least 20 feet from the property line. Vision clearance bars anything between 2.5 and 10 feet above grade within 100 feet of intersecting street centerlines, and corner, double-frontage, and open-space-abutting fences must show the finished side outward. We confirm the current requirement with Millington Planning and Development before we build.

Drainage & Easement Rules

Millington sits between Big Creek and the channelized Loosahatchie River, and the May 2010 Big Creek levee breach flooded homes on and around Naval Support Activity Mid-South. That history is why the code requires ground clearance for free drainage with a two-inch minimum in a drainage easement, and why the city can require removal of any fence in a public easement at the owner's expense. We confirm the current requirement with Millington Planning and Development before we build.

Our Fencing Services

Complete Fencing in Millington — Every Style, Every Material

From full backyard privacy enclosures to custom gates, every fence we build in Millington comes with the same lifetime workmanship warranty.

Privacy Fence

Full-height wood or vinyl privacy fencing — the most popular choice for Millington backyards, where side and rear yards allow up to 8 feet. Board-on-board, shadowbox, or solid panel designs built to block sightlines and hold their line through seasonal soil movement.

Get a Free Quote

Wood / Cedar Fence

Western red cedar and pressure-treated pine fences with stainless-steel hardware. Wood is one of the materials Millington allows in a front yard, which makes it a practical choice for a front picket run as well as a full privacy line.

Get a Free Quote

Vinyl Fence

Low-maintenance vinyl fencing that never needs painting or staining. Impervious to termites, won't warp in West Tennessee humidity, and available in privacy, semi-privacy, and picket styles — including the PVC picket Millington allows in front yards.

Get a Free Quote

Chain Link

Galvanized and vinyl-coated chain link for security, pet containment, and pool enclosures. Under Millington's rules chain link is allowed in side and rear yards only where it is not visible from the street, so we lay it out accordingly.

Get a Free Quote

Aluminum / Ornamental

Powder-coated aluminum ornamental fencing with wrought-iron curb appeal and none of the rust. A natural fit for Millington front yards, where wrought iron with brick or stone columns is among the approved materials.

Get a Free Quote

Gates

Custom driveway, pedestrian, and double-entry gates in wood, aluminum, or steel. Heavy-duty hinges and self-closing hardware, with the layout set to respect Millington's 20-foot front-yard gate offset and corner-lot vision clearance.

Get a Free Quote
Our Inspection Checklist

What We Look For on a Millington Fence Job

Every North Slope Exteriors fencing project in Millington starts with a thorough site walk. These are the specific items we check before the first post hole is dug.

City of Millington fence permit confirmed before installation, with the current requirement verified with Millington Planning and Development
Property pins and the site drawing — the permit application calls for a drawing showing the fence relative to the property line, so we locate and flag the pins and match the recorded plat
Easement check for drainage and public easements, since the city can require removal of any fence in a public easement at the owner's expense
Utility locate through Tennessee 811 before any digging — gas, electric, water, and fiber identified and marked along the full run
Corner-lot vision clearance reviewed, keeping anything between 2.5 and 10 feet above grade clear within 100 feet of intersecting street centerlines
The 15-foot corner-lot setback off the street right-of-way, with the run placed in the yard other than the principal entrance
The 48-inch front-yard cap and 20-foot front-yard gate offset confirmed against the current code before any layout is staked
Drainage clearance for free drainage, including the two-inch minimum ground clearance required in a drainage easement, so the fence never dams water
Finished-side orientation checked for corner, double-frontage, and open-space-abutting fences, which must show the finished side outward
Grandfathering limits for replacements reviewed — existing fences may not be grandfathered indefinitely, and posts set in concrete below the active soil moisture zone where seasonal shrink and swell happens, using ground-contact rated ACQ, MCA, or CA-B treated posts
FAQ

Millington Fencing Questions, Answered

Yes. Millington Municipal Code Title 13, Chapter 8 requires a city fence permit before installation, and the application includes a drawing showing the fence relative to the property line. We pull the permit as part of the job, and we confirm the current requirement with Millington Planning and Development before we build.

Chain link is allowed in side and rear yards only where it is not visible from the street. It is not one of the materials approved for a front yard, where the code limits you to split rail, brick, wood or PVC picket, and wrought iron with brick or stone columns — anything else needs Planning Commission approval. We confirm the current requirement with Millington Planning and Development before we build.

Front yards are capped at 48 inches, and side and rear yards run up to 8 feet. On a corner lot, a fence over 48 inches must sit 15 feet back from the street right-of-way and go in the yard other than the principal entrance. Vision clearance also bars anything between 2.5 and 10 feet above grade within 100 feet of intersecting street centerlines. We confirm the current requirement with Millington Planning and Development before we build.

Sometimes, but the rules matter here. Grandfathering limits for replacements mean an existing fence may not be grandfathered indefinitely, and lack of upkeep is itself a code violation in Millington. If your fence has fallen into disrepair, patching it may not resolve the underlying issue with the city. We walk the fence with you, tell you honestly which side of that line you are on, and confirm the current requirement with Millington Planning and Development before we build.

Fence pricing depends on the material you choose, the linear footage of the run, how many gates you need, and the grade of your site. Because those vary so much from one Millington property to the next, we do not quote from a chart. We come out, measure your property, walk the grade, and give you a free written quote with exact pricing.

Yes, flexible financing options are available for qualified Millington homeowners. Ask about them during your free estimate and we will walk you through what is available for your project.

Service Area

Fencing Services Across Millington & North Shelby County

We provide complete fencing services throughout Millington and the surrounding north Shelby and Tipton County communities.

Millington

38053

Bartlett

Nearby community

Cordova

Nearby community

Memphis

Nearby community

Munford

Nearby community

Atoka

Nearby community

Lakeland

Nearby community

Arlington

Nearby community

Raleigh

Nearby community

Get Started

Get Your Free Millington Fencing Quote

Fill out the form below and we will be at your Millington property for a comprehensive, no-obligation on-site fence estimate within 48 hours. Same-day consultations available — call (870) 218-4440.